Aluminum wire (Pure Aluminum Wire, Aluminum Line and Spray Finishing Aluminum
Wire,2.5mm pure aluminum wire for thermal spraying factory) ,The
surface of aluminum wire is smooth and bright; no break of wire
exists; single wire has no greasy dirt, burr, scratch or scar;
there is no block of device in application.
The product adopts high quality aluminum ingot, no other substances
enter the process from raw material (aluminum ingot) input to strip
output, and the product is not exposed to other metal. The
detection adopts DF-100 type direct-reading spectrometer,
inductively coupled plasma atomic emission spectrum and other
high-end testing instruments. Strict check and detection are
conducted in the whole working procedures including raw
material-wire output-big drawing-middle drawing-water
tank-baling-storage. Not a tiny detail is neglected. Hence, the
long-term stability of product performance is ensured. The content
of each batch of aluminum wire is guaranteed to be above 99.7%.
|product Name||Diameter||Package||Aluminum Content||Application|
|Aluminum Wire||1.0- 5mm|
|≥99.7%||Cable industry and thermal spraying, aluminum spraying and
anticorrosion on the surface of capacitor, power tower, iron tower,
container, derrick, bridges, sluice gate, tunnel framework, metal
support, large steel structure and others.|
1. The size and shape of spraying are insusceptible. Spraying can
be conducted on the whole surface, or on a large defined surface,
which is a convenient and economical method in coating the partial
surface of a large unit.
2. The parent material doesn’t change. For the heated temperature
on parent material is low during spraying, the work piece only
3. The thickness of coating varies in a large range, from several
microns to several millimeters.
4. Spraying moulding is available. Thermal spraying technology can
not only form a coating on the surface of material, but also be
used to manufacture machinery parts, namely, spraying molding
Transportation & Storage: Wrap page and means of transportation
with acid, alkali or salt that may corrode aluminum are forbidden.
Aluminum segment should be stored in a dry and ventilated storeroom
which is free of corrosive substance and be protected from rain.
Aluminum wire is widely applied to thermal spraying anticorrosion,
container, bridge, head frame, storage tank, electric iron tower,
poles and towers, capacitor, metal bracket, nodular cast iron pipe,
traffic equipments, etc.